| USB 3.2 Doubles Data Speeds: 20 Gbps Using Multi-Lane Operation How To Install... | |
|
 |
 | xda-developers
Jul 26, 2017 10:00 PM • by Steven Zimmerman | USB 3.2 Doubles Data Speeds: 20 Gbps Using Multi-Lane Operation The USB-IF and the USB 3.0 Promoter Group have announced USB 3.2, which will be fully unveiled at USB Developer Days 2017 in September. USB 3.2 brings support for multi-lane USB operation, in order to provide USB data transfer speeds of up to 20 Gbps (2.5 GB/s) over a USB Type-C cable. It comes as no surprise that USB 3.2 is adding multi-lane operation, as USB Type-C already added the ability to pair the SuperSpeed USB lanes together in order to send other data protocols over the USB Type-C interface with USB Alternate Mode. Using those techniques for regular USB data transfers was a clear step forward to take. That being said, it is a bit surprising to see that USB 3.2 is limited to using only two of the four SuperSpeed USB lanes available in the USB Type-C connector, and we may still see further improvements in the future to enable the usage of the remaining lanes. The USB 3.2 update brings no substantial changes to the physical data layer or encoding techniques used for SuperSpeed USB, but rather is primarily an update to the hub specification to allow for the lane pairing needed for multi-lane USB operation. Keeping the physical data layer and encoding techniques consistent ensure full backward compatibility with past USB versions for USB 3.2 devices, which is always a key concern for the USB-IF and the USB 3.0 Promoter Group. With USB 3.0 having launched in 2008 (and USB 3.1 in 2013), some people were starting to look towards USB 4.0, and while it can be sure that USB-IF is working on next generation improvements to the USB specification, USB 3.2 should help placate those that need faster transfer speeds for the moment.
Do you use USB 3.1's full 10 Gbps transfer speeds? What do you think USB 4.0 will bring? Let us know in the comments below! Press Release  | | Android Advices
Jul 22, 2017 1:59 PM • by Karthik Iyer | How To Install Android Nougat Based 5.8.3 Resurrection Remix ROM On Lenovo K6 Power Smartphone Lenovo launched the new K6 Power smartphone a couple of months back and it is one of the most popular devices that Lenovo launched in recent times. It is a budget mid-ranged offering from the company which packs a huge battery and hence the name Power. It will easily last you for upto 2 days with medium usage on a single charge. However, if you own this smartphone, then you already know that the software on it is not the best one out there. However, there is not a lot that you can do, other than flashing a third party custom ROM. There are a ton of options available for that in the market. Well, if you are wondering how to do it, then you are in the right place. Today we will show you exactly How To Install Android Nougat Based 5.8.3 Resurrection Remix ROM On Lenovo K6 Power Smartphone. About the ROM Below are some of the working features of the smartphone on this ROM – - Camera rear/front (Photographs)
- Camera rear/front (Video – Use Camu from Play Store)
- Auto brightness.
- Fingerprint.
- Bluetooth, Mic, Wi-Fi, GPS, IR
- Hotspot
- RIL
Now that it is out of the way, let's check out some of the requirements that are necessary for the installation. Below are some of the pre-requisite for the same – Pre-requisite - The first thing which you need to make sure is that you are creating a complete backup of your files. Since we will be completely wiping the internal memory of the phone, you will end up loosing all your files.
- You also need to make sure that you are installing a custom recovery software. You can install any of your choices, however, we suggest you go for TWRP for this installation.
- You also need to make sure that the battery in the tablet has about 60-percent charge before you begin the installation. If your smartphone's battery dies during the installation, then you may end up with a completely bricked smartphone.
- And lastly it is also necessary to make sure that you have downloaded the firmware file which is necessary for the installation. Without this file, you won't be able to proceed with the installation and hence we suggest you download the same from the link given below.
Download Resurrection Remix Nougat ROM For Lenovo K6 Power Installation - Assuming that you have downloaded the files given in the link above, it is now time to begin the installation process.
- The first thing which you need to make sure is that you copy the downloaded file to the smartphone.
- Once done, simply turn off your phone and enter into the recovery mode. You can do this by pressing Volume Down + Power Key at the same time.
- After this, once you are in the recovery menu, look for wipe and format option ⇒ wipe data, system, cache and Dalvik cache and initiate it.
- Once done, now return back to the recovery menu and tap on Install.
- Now it will ask you to browse for the firmware file which you had copied earlier. Simply navigate to the same and select it.
- After that simply swipe to begin the installation.
- Do make a note that the installation will take some time and hence we suggest you be patient with the same.
- After it is done, before rebooting you can also choose to install the GApps.
- Once this is done, your device will automatically reboot into the new ROM.
Do make a note that the first reboot may take a long time and hence we suggest you stay patient with the same. Having said, if you have any queries regarding the setup, then be sure to let us know by commenting down below and also stay tuned to Android Advices for more tutorials like this.  | | |
|
|---|
|
| This email has been sent by Froze ONE (isnanmm0@gmail.com). It is the potion result of 'Tech: Topic watch' from the dashboard 'Personal Dashboard', tab 'Tech > Android'. Turn off or edit this potion | |
| |
|
|
|
0 Response to "USB 3.2 Doubles Data Speeds: 20 Gbps Using Multi-Lane Operation How To Install..."
Post a Comment